Detailed Product Description

1 According to the design philosophy of man-machine engineering, in the control mechanism, steering control pull rod and throttle control are put at the left side of drivers, which improves their operation comfort. 
2All the control mechanism uses flexible shaft coupling, which is convenient for repair and adjustment.
3The interior decoration uses advanced injection interior decoration materials, which is elegant in appearance and makes the operation environment more comfortable.
4New chair seat in the driving cab is elegant in appearance and convenient to be adjusted forward and back, up and down and can satisfy demands of different drivers to reduce their tiredness. 
5Use injection instrumental box and electrical, instrumental and air conditioning systems are put forward, which is elegant and harmonious.
6The appearance molding design of the complete machine is beautiful and elegant; well sealing hexahedron driving cab helps drives to have broader visual field and provides good working environment for them. 
7Forward headlights use embedded structure.
8Guiding wheel, bearing wheel and carrying wheel all use floating oil seal and there is bimetal sleeve with good wear resistance and reliability in guiding wheel and bearing wheel, which greatly extend the service lifetime .
9Steering clutch uses wet multiple discs friction plate, and is tighten by pressured springs and often joints with hydraulic separated clutch. 
10According to needs of users, choose Weifang WD615T1-3A or Chongqing Comings Engines.
11Inlayed gear block chain wheel structure is convenient for repair; the sealing inside and outside chain wheel uses floating oil seal, which has high reliability and long service lifetime. 1   Structural weight (kg):   
16740 (Straight spade, without anti-vibration shelf and agitator )
17662 (Straight spade, with anti-vibration shelf, without agitator )
 18905 (Angel spade, with anti-vibration shelf and agitator)
2Performance dimension
1 Minimum radius of gyration (m):       3.1
2Gradeability :           300
3 Stability (front-back-left-right)     350      
4Speed(km/h):  forward    reverse
Speed I     0~3.8          0~4.9 
Speed II     0~6.6          0~8.5
 Speed III    0~10.6         0~13.6
5Total length × width × depth:  5025×3416×2783 (to the top of exhaust pipe without tooth depth 65)
                                                            5025×3416×3025 (to the top of driving cab without tooth depth 65)
                                                            6256×3416×3210 (to the top of anti-vibration shelf with tooth depth 65)
6Crawler centre distancemm:           1880 
7Width of track shoemm:                510
8 Grounding lengthmm:                  2430
9 Grounding pressurekPa:                   65.8 
10 Minimum ground clearancemm                 400
11) Max. drawbar pull kN                     150
12 Max. working efficiency (40m load distance)  m3/h  145
3 Power transmission
1Engine:
Number of cylinders- bore × stroke:   6-126×130
Power [kwpsr/min]:  120163/1850
Max. torque [N.m/r/min]:  768/1100~1200
Rated condition specific fuel consuming rate [g/kw.h]≤225
Minimum fuel consuming rate [g/kw.h]      215
2Hydrodynamic torque converter: single-stage, single-phase, three-element
3 Power shift gear box
Epicyclic gearing,manual hydraulic gear shift, forced lubrication
 Three forward gears and three reverse gears
4 Central transmissionspiral taper gear, splash lubrication
5Final transmission: double reduction with spur gear
4walking part:
1Riding wheel (one side×2 ): 2×2
2Bearing wheel (one side×2 ):  6×2
3 Crawler: composite type, single tooth, tooth depth 65mm, the width of track shoe 510mm
5Working hydraulic system
1Oil pump: gear type, output  250L/min1850r/min
2 Control valve:  duplex
3Cylinder:  double acting piston type
4 Hydraulic tank:   control valve built in type
6Working device
   1 Supporting methods:  inclined support with inclined cylinder in the left side
   2Main parameters:    
Direct inclined spade.71 (wet land.71) U spade.73 spade for environmental sanitation .75 (we land. 75) angle spade. 70
The width of mould board (mm)  3416 4150  3477   3416 4150    3970
The depth of mould board (mm) 150 1005.5 1140   1650 1555.5   1032
The weight of working device (kg) 2400 2290   2825   2516 2404    2163
Shovel blade capacitym3       4.5 4.2     5.0    9.0  9.7      4.2
Cutting blade angel of the mould board  550
Max. lifting ground (mm)  1095 1125   1095  1095 1125    1110
Max. digging depth (mm)   545 450     545   545 450     530
Max. amount of inclination(mm):   860           860    860      400 ( each 250 for forwards and backwards) 
Ripper: Max. digging depth (mm)   572
Max. lifting height (mm)     700
weight (kg)        1633.78A1480
Overall dimensions of rigger: length × breadth × height (mm): 1692×2085×1280